Orion, piccoboard+, blades+ bits for sale.

I have had no luck selling my Bell222, so I'm
offering some bits for sale .

An Orion Elite motor( bought in Spring, perfect condition)
Piccoboard plus(new 6ch version.) blades cut for use with the
Orion motor.
I would like £140 for these.

I will throw in 3 packs of good nicads( up to 5 mins with the
above parts), spare brass pinion tail motor, spare G310.
Pare of cut tuning blades , and if you would like it
a damaged/repaired flyable Airwolf canopy fitted with retract servo

The Orion and cut blade combo gives very good duration and power
to almost match brushless, just with more simplicity. The
above parts are very good in forward flight when combined
with a head stiffener( There's one in the deal ).
Duration using Sanyo 720 nimh is 12mins out of GE.

Come on guys, somebody make my day, and I'll pay postage.

Cheers, Allan

[stef]

would you be interested in splitting, as i wouldnt mind an orion motor? i am skint at the moment, but i will try to scrounge some cash

How badly is the airwolf damaged? Would you sell it seperate?

Bill B.

If you do split, I may be interested in the damaged Airwolf fuse.

Peter

Jonesy, I will give you $150 US for the lot. I assume the pic board will work fine over here. Let me know. You can email me at jhearn@cwnet.com.

[jerrysimon]

Ok, I would go for the Pico Board plus (and backsy the flybar stifner and tail motor & pinnion ?) I have 3 sets of main blades so perhaps they could go with the Orion (I also have just bought one of those drat!) Right so that way if you split as others request then your sell the lot [img]/ubbthreads/images/icons/grin.gif[/img] So let us all know the split costs (mail me re the Piccoboard) and you will have a deal with all three of us here in the UK, unless of course you go for the $150 offer.

Regards

Jerry

Stef,

Yeh, sounds cool. Check your mail(no don't, it didn't work)
Does £35 sound OK, You can have the cut blades,and
a pack of nicads to make it taste better. Also the
Orion is titchy and BIG parcels are good. Motor has metal
pinions with it( use the 8 tooth, use 9 or 10 if you get
some Hornet CF blades).

Allan

Allan

BBBix and Ihearn

Thanks guys, but I'll have to go with the UK bod's.
If I split, that's a lot of postage. Plus I don't think
you use 35mhz in US, so the piccoboard would be useless.
Correct me if that's wrong. $150.....you're breaking my balls [img]/ubbthreads/images/icons/grin.gif[/img]

Thank's anyway, Allan

$150 jhearn! I love it. I have a 35mhz 5 channel receiver out of a piccoboard plus that I will sell if someone in the UK wants it. Email me.

Roboherb,...What's in a name, quite a bit possibly [img]/ubbthreads/images/icons/cool.gif[/img]

How's £20 sound, the damage is to the boom( first and last
time I use the CP kit with a foamie, those blades don't half
wallop round) . It's glued back together, and the hole covered
with tape and repainted, The tail motor is mounted on ahome made
CF tail unit that has bearings only 1.2mm wide and 4mm diameter
( I'll fit 2 as you may have difficulty sourcing them )This
unit weighs a fraction of the original, but I'll supply a std tail housing
just in case you drop one of the bearings. Retract servo is fitted,
Just remember to set the end points to zero before connecting
as you may do some damage if the servo deflects fully.
The finish is better than the original with those horrid lumps and creases removed.
and is finished in charcoal black instead of flat black, looks
better on the mantlepiece.