Still at it

Well Im still doing a few 3 second hopping around the floor things, and after reading some posts tried adjusting the ATV and the mixing on the Picboard, the more I tune the worse it gets hehe
think Im just goinf to buy a helium ballon and tie it to a table leg. ;-)

But being as stubborn as a mule,,,,,, I WILL LEARN THIS $#@$$ thing if it kills me (or the dog) which ever comes first.

If I could get both Paul G and Radd to move to St Louis since thats pretty central I would have it made ;-)

Keep at it howard you will get it.... start with your "gain" and "mix" at around 90%

charles

[Qema]

It's a steep learning curve. Took me a month to hover a full pack without touching the ground once. Every night, night after night. Pack after pack, step by step , inch by inch, Anyways you get the point.

Crank you atv all the way down. Put your links in the inner most servo arm holes. That way you won't over correct.

If it scoots off in one direction, stop and retrim using you sub-trims. Sub-trims are your friends.
Trim and balance. The "mantra"

Crank the ATV settings all the way down? Will the arms still move?

[Qema]

I my Hitec they do. Try it , you may like it.

Ok I tried setting them down to the low end and the arms didnt move,,,
you owe me a new coffee table!

Just kidding ;-)

[Qema]

Thank god it's just a coffee table and not a piccolo [img]/ubbthreads/images/graemlins/smile.gif[/img]