Venti 660 motor for ECO 8

[KRP]

Hello,
Is there someone who have use the Jamara Venti 660 on the ECO 8 ???.
I've purchase one and I have got only 8 cells packs, so I would like to know which pinion can I use to get 1200 U/mn on the rotor.
Thanks guys for your answer

Have fun
KRP

[Bejay]

I've done a web search and come up with this information:-


Technical data:
Operating voltage: 4 - 12V
Rated voltage: 7,2V
Idle current: 1.25 A
Idling speed: 17.600
Best efficiency: 71 %
River with max. Efficiency: 10.2 A
Blocking current: 84 A
Dimensions mm: 36x65
Motor shaft: 3.17 mm
Weight: 202 g


The idle speed and idle current I believe is the no load speed and current, so I would say you need to try around the 14, 15, 16 area.

I don't know anything about the motor other than the info I've found. It may not have sufficient overall power for the ECO 8, I just don't know.

[KRP]

thanks for the details BUZZ

May be I think It is a little bit less powerful than the Hurricane motor (used in UK) :
------------
Hurricane 650 Race Motor 21000 rpm FREE RUNNING ON 8 CELLS : 15 – 18 AMPS ON LOAD : 100 AMPS STALL. INCORPORATES INTERNAL IMPELLER FAN FOR MAXIMUM COOLING & EFFICIENCY. DYNAMICALLY BALANCED ARMATURE & TRUED COMMUTATOR FOR TURBINE LIKE RUNNING.
-----------------------------
I'll have a try next weekend with a 14 T at first to see if that's enought.

Thanks again
Regards,

KRP

[Bejay]

If it's less powerful than the Hurricane, it won't be much good on the ECO. Hurricanes do fly the ECO, but they don't light up the sky unless you use 10 cells.

[KRP]

Ok so I'll buy a 10 cells as soon as possible to do some test. I've just see that german also use 10 cells for the Venti.

Thanks Buzz
Have fun with your eco
Regards
KRP